DCMQ
High-induction circular diffuser with adjustable cones made up of concentric truncated cone profiles on a square panel, suitable for installation on false ceilings with 600×600 panels. Height adjustable by means of an adjustment screw in order to change the direction of the air jet in relation to the required thermal conditions.
SPECIFICATIONS
• MATERIAL: aluminium and steel
• SURFACE FINISH: epoxy powder coating resistant to impact and abrasion
• COLOUR: RAL white 9010 glossy, 9016 glossy, 9003 mat. On request, coating in nonstandard RAL colours
• FASTENING: by means of screws positioned on the diffuser neck
• INSTALLATION HEIGHT: 2.7 – 6 m
• USE: room cooling and heating
GREEN BUILDING
Contribute to obtain the credits of the major international rating systems for suistainable buildings:
- LEED: IP, EA, MR
- WELL: MATERIALS, COMMUNITY
- BREEAM: MAN, WST
INSTALLATION
Easy installation, adjustments and maintenance. The intermediate cones are easy to remove by turning the central hollow threaded pin. The damper fitted at the top of the diffuser is adjusted by acting on the adjustment screw through the hole in the threaded bar of the diffuser.
It is fastened to the ceiling by means of screws on the diffuser neck.
ADJUSTMENT
Central cone in low position: optimal position in cooling conditions in order to have the largest horizontal diffusion radius without creating discomfort in the occupied area in rooms with an ideal height between 3 and 4 m. With this configuration, you have the best pressure drop, velocity and sound level conditions. The maximum temperature difference (Dl) between the ambient air and the air flowing from the diffuser to obtain the optimal induction conditions is 12°C.
Central cone in high position: optimal position for particularly high rooms up to 6 m and in heating conditions, as you obtain a vertical throw that resists the convective motion of the
ambient air.
DOWNLOAD TECHNICAL SHEET >>
Related products
-
KC35
Synthetic flat filter celi tor fan coils with U-section galvanised steel frame and double electrowelded galvanised wire mesh that supports the filter fabric in thermobonded synthetic polyester staple fibre impregnateci with AC CARBON series active carbons with a basis weight of 200 g/m² and a thickness of 5-10 mm.
Read more -
SA10/ESP SLEEVE Mastersan
Insulating sleeve produced with exclusive technology by TECNICA SRL.
Read more -
DSRQ – DSRSQ
Variable geometry diffuser on 597×597 mm panel developed for rooms with high ceilings where a long throw and a high induction ratio are required. Made up of a half-housing in which individually or simultaneously adjustable deflectors are fitted (if required) in order to change the direction of the air jet in relation to the thermal conditions required.
Read more -
DAM01C
Helical-effect diffuser with radially arranged adjustable deflectors with a high induction ratio (mixing capacity) between the injected and the ambient air. Made up of a plate with holes inside which adjustable plastic deflectors are housed suitable for use at high operating temperatures.
Read more
DCMQ
High-induction circular diffuser with adjustable cones made up of concentric truncated cone profiles on a square panel, suitable for installation on false ceilings with 600×600 panels. Height adjustable by means of an adjustment screw in order to change the direction of the air jet in relation to the required thermal conditions.
SPECIFICATIONS
• MATERIAL: aluminium and steel
• SURFACE FINISH: epoxy powder coating resistant to impact and abrasion
• COLOUR: RAL white 9010 glossy, 9016 glossy, 9003 mat. On request, coating in nonstandard RAL colours
• FASTENING: by means of screws positioned on the diffuser neck
• INSTALLATION HEIGHT: 2.7 – 6 m
• USE: room cooling and heating
GREEN BUILDING
Contribute to obtain the credits of the major international rating systems for suistainable buildings:
- LEED: IP, EA, MR
- WELL: MATERIALS, COMMUNITY
- BREEAM: MAN, WST
INSTALLATION
Easy installation, adjustments and maintenance. The intermediate cones are easy to remove by turning the central hollow threaded pin. The damper fitted at the top of the diffuser is adjusted by acting on the adjustment screw through the hole in the threaded bar of the diffuser.
It is fastened to the ceiling by means of screws on the diffuser neck.
ADJUSTMENT
Central cone in low position: optimal position in cooling conditions in order to have the largest horizontal diffusion radius without creating discomfort in the occupied area in rooms with an ideal height between 3 and 4 m. With this configuration, you have the best pressure drop, velocity and sound level conditions. The maximum temperature difference (Dl) between the ambient air and the air flowing from the diffuser to obtain the optimal induction conditions is 12°C.
Central cone in high position: optimal position for particularly high rooms up to 6 m and in heating conditions, as you obtain a vertical throw that resists the convective motion of the
ambient air.
DOWNLOAD TECHNICAL SHEET >>
Related products
-
DCSQ
Circular diffuser with adjustable cones made up of concentric truncated cone profiles on a square panel, suitable for installation on false ceilings with 600x600mm panels. Height adjustable by means of an adjustment screw in order to change the direction of the air jet in relation to the required thermal conditions.
Read more -
DSRQ – DSRSQ
Variable geometry diffuser on 597×597 mm panel developed for rooms with high ceilings where a long throw and a high induction ratio are required. Made up of a half-housing in which individually or simultaneously adjustable deflectors are fitted (if required) in order to change the direction of the air jet in relation to the thermal conditions required.
Read more