DWS
Helical throw diffuser on square panel characterised by a series of 36 fixed fins positioned in radial direction. The helical throw given on the air injected by the particular geometry of the deflectors allows obtaining a high induction ratio and consequently rapid reduction of the air velocity and temperature difference.
SPECIFICATION
• MATERIAL: painted galvanised steel panel
• SURFACE FINISH: epoxy powder coating resistant to impact and abrasion
• COLOUR: RAL 9010 white. On request, coating in nonstandard RAL colours.
• FASTENING: the diffusers are fastened to the plenum by means of side screws or a central screw. Using a central screw to fasten the diffuser to the plenum bridge makes it particularly easy to install. To ensure throw stability, it is suggested to install it flush with the ceiling.
• INSTALLATION HEIGHT: 2.7 – 3.6 m
• USE: The diffuser can also be used for air return; in this case it is supplied without deflecting fins. The deflectors can also be oriented after the diffuser has been installed in order to make adjustments to optimise airflow in the room once the system is running.
The front panel dimensions allow installation on a false ceiling of 600×600 mm.
GREEN BUILDING
Contribute to obtain the credits of the major international rating systems for suistainable buildings:
- LEED: IP, EA, MR
- WELL: MATERIALS, COMMUNITY
- BREEAM: MAN, WST
INSTALLATION
Easy installation, adjustments and maintenance.
ADJUSTMENT
The airflow distribution is manually adjusted by acting on the deflectors that are fitted with a snap positioning device so that they stay in position during operation.
DOWNLOAD TECHNICAL SHEET >>
Related products
-
SA10 THERM Mastersan
Flexible hose made of addivated polyolefin resins film with anti-bacterial, antimildew and anti-viral material protection with steel wire helix. Thermoinsulating covering in polyester fibre (thickness 25mm/16kg/m3). Outer aluminized film protection (flame retardant).
Read more -
DCMC
High-induction circular diffuser with adjustable cones made up of concentric truncated cone profiles. Height adjustable by means of an adjustment screw in order to change the direction of the air jet in relation to the required thermal conditions.
Read more -
DCMQ
High-induction circular diffuser with adjustable cones made up of concentric truncated cone profiles on a square panel, suitable for installation on false ceilings with 600×600 panels. Height adjustable by means of an adjustment screw in order to change the direction of the air jet in relation to the required thermal conditions.
Read more -
DAM31
Helical-effect diffuser with helically arranged adjustable deflectors with a high induction ratio (mixing capacity) between the injected and the ambient air. Made up of a plate with holes inside which adjustable plastic deflectors are housed.
Read more
DWS
Helical throw diffuser on square panel characterised by a series of 36 fixed fins positioned in radial direction. The helical throw given on the air injected by the particular geometry of the deflectors allows obtaining a high induction ratio and consequently rapid reduction of the air velocity and temperature difference.
SPECIFICATION
• MATERIAL: painted galvanised steel panel
• SURFACE FINISH: epoxy powder coating resistant to impact and abrasion
• COLOUR: RAL 9010 white. On request, coating in nonstandard RAL colours.
• FASTENING: the diffusers are fastened to the plenum by means of side screws or a central screw. Using a central screw to fasten the diffuser to the plenum bridge makes it particularly easy to install. To ensure throw stability, it is suggested to install it flush with the ceiling.
• INSTALLATION HEIGHT: 2.7 – 3.6 m
• USE: The diffuser can also be used for air return; in this case it is supplied without deflecting fins. The deflectors can also be oriented after the diffuser has been installed in order to make adjustments to optimise airflow in the room once the system is running.
The front panel dimensions allow installation on a false ceiling of 600×600 mm.
GREEN BUILDING
Contribute to obtain the credits of the major international rating systems for suistainable buildings:
- LEED: IP, EA, MR
- WELL: MATERIALS, COMMUNITY
- BREEAM: MAN, WST
INSTALLATION
Easy installation, adjustments and maintenance.
ADJUSTMENT
The airflow distribution is manually adjusted by acting on the deflectors that are fitted with a snap positioning device so that they stay in position during operation.
DOWNLOAD TECHNICAL SHEET >>
Related products
-
DCMC
High-induction circular diffuser with adjustable cones made up of concentric truncated cone profiles. Height adjustable by means of an adjustment screw in order to change the direction of the air jet in relation to the required thermal conditions.
Read more -
DAM31
Helical-effect diffuser with helically arranged adjustable deflectors with a high induction ratio (mixing capacity) between the injected and the ambient air. Made up of a plate with holes inside which adjustable plastic deflectors are housed.
Read more