Share
DAM61
Inspectable diffuser on square panel with adjustable deflectors with a high induction ratio between the injected and the ambient air. (choice of models DAM01- DAM31 DAM02-DAM12 DAM15 DAM11 DAM41 DAM51)
SPECIFICATION
• MATERIAL: steel panel and black deflectors
• SURFACE FINISH: epoxy power coated
• COLOUR: RAL 9010 white. On request, coating in non-standard RAL colours.
• FASTENING: by means of side screws or a central screw
• INSTALLATION HEIGHT: 2.5 – 4 m
• USE: The basic characteristic of this type of diffuser is that it is inspectable. It is a great help to save time when routine or extraordinary maintenance needs to be carried out on the air-conditioning system.
It consists of a frame in which the panel is fitted with side fastening holes, and a special hooking system allows opening the diffuser with just one light touch if necessary.
The flow of the air injected can be oriented clockwise, anticlockwise or alternating by changing the position of the deflectors.
The entire standard DAM range available in the catalogue can be fitted in this type of frame. The flow rate is just below standard, as the panel is slightly smaller.
The DAM61 diffuser can also be used for air return; in this case it is supplied without deflecting fins. The deflectors can also be oriented after the diffuser has been installed in order to make adjustments to optimise airflow in the room once the system is running.
The movable deflectors complete with fin, coupling and support are made of plastic suitable for use at high operating temperatures. The perforated panel is made of sheet steel coated with epoxy resin powder electrostatically applied and furnace dried. This type of coating is resistant
to impact and abrasion and maintains the aesthetic features unaltered over time.
GREEN BUILDING
Contribute to obtain the credits of the major international rating systems for suistainable buildings:
- LEED: IP, EA, MR
- WELL: MATERIALS, COMMUNITY
- BREEAM: MAN, WST
INSTALLATION
Easy installation, adjustments and maintenance. The diffusers are fastened to the plenum by means of side screws or a central screw.
DOWNLOAD TECHNICAL SHEET >>
Related products
-
KC35
Synthetic flat filter celi tor fan coils with U-section galvanised steel frame and double electrowelded galvanised wire mesh that supports the filter fabric in thermobonded synthetic polyester staple fibre impregnateci with AC CARBON series active carbons with a basis weight of 200 g/m² and a thickness of 5-10 mm.
Read more -
AL/SA MASTERSAN
Flexible hose made with AL (aluminium) wall coupled to addivated polyolefin resins film with anti-bacterial, anti-mildew and anti-viral material protection. Inner helix made of steel wire.
The set of materials for the construction of the flexible hose does not provide for the usage of chemical agents, stickers or adhesives.
Read more -
DSR – DSRS
Variable geometry diffuser developped for rooms with high ceilings where a long throw and a high induction ratio are required. Made up of a housing in which individually or simultaneously adjustable deflectors are fitted (if required) in order to change the direction of the air jet in relation to the thermal conditions required.
Read more -
DAM31
Helical-effect diffuser with helically arranged adjustable deflectors with a high induction ratio (mixing capacity) between the injected and the ambient air. Made up of a plate with holes inside which adjustable plastic deflectors are housed.
Read more
DAM61
Inspectable diffuser on square panel with adjustable deflectors with a high induction ratio between the injected and the ambient air. (choice of models DAM01- DAM31 DAM02-DAM12 DAM15 DAM11 DAM41 DAM51)
SPECIFICATION
• MATERIAL: steel panel and black deflectors
• SURFACE FINISH: epoxy power coated
• COLOUR: RAL 9010 white. On request, coating in non-standard RAL colours.
• FASTENING: by means of side screws or a central screw
• INSTALLATION HEIGHT: 2.5 – 4 m
• USE: The basic characteristic of this type of diffuser is that it is inspectable. It is a great help to save time when routine or extraordinary maintenance needs to be carried out on the air-conditioning system.
It consists of a frame in which the panel is fitted with side fastening holes, and a special hooking system allows opening the diffuser with just one light touch if necessary.
The flow of the air injected can be oriented clockwise, anticlockwise or alternating by changing the position of the deflectors.
The entire standard DAM range available in the catalogue can be fitted in this type of frame. The flow rate is just below standard, as the panel is slightly smaller.
The DAM61 diffuser can also be used for air return; in this case it is supplied without deflecting fins. The deflectors can also be oriented after the diffuser has been installed in order to make adjustments to optimise airflow in the room once the system is running.
The movable deflectors complete with fin, coupling and support are made of plastic suitable for use at high operating temperatures. The perforated panel is made of sheet steel coated with epoxy resin powder electrostatically applied and furnace dried. This type of coating is resistant
to impact and abrasion and maintains the aesthetic features unaltered over time.
GREEN BUILDING
Contribute to obtain the credits of the major international rating systems for suistainable buildings:
- LEED: IP, EA, MR
- WELL: MATERIALS, COMMUNITY
- BREEAM: MAN, WST
INSTALLATION
Easy installation, adjustments and maintenance. The diffusers are fastened to the plenum by means of side screws or a central screw.
DOWNLOAD TECHNICAL SHEET >>
Share
Related products
-
DCSC
Circular diffuser with adjustable cones made up of concentric truncated cone profiles, adjustable in height by means of a screw in order to change the direction of the air jet in relation to the required
Read more -
DMU
Diffuser with individually adjustable micro nozzles with high output velocity and low sound in order to obtain extensive penetration depths of the room to be air conditioned.
Read more
