Share
VEA
Steel ventilation valve diffuser. The air flow rate is adjusted by screwing (reducing the flow rate) or unscrewing (increasing the flow rate) the central disc.
SPECIFICATION
• MATERIAL: steel
• COLOUR: RAL 9016 white.
• FASTENING: ceiling-mounted or fitted directly on the ventilation or return duct in service rooms
• INSTALLATION HEIGHT: 2.5 – 4 m
• USE: suitabl e for injecti ng or extractin g air i nto/from small rooms (bathrooms, kitchens); it can also be used as return terminai in medium-large rooms.
INSTALLATION
EASY INSTALLATION, adjustments and maintenance. The central disc is easy to remove by unscrewing the fastening nut and the central pin.
ADJUSTMENT
The air flow rate is adjusted by turning the disc away from (increasing the flow rate) or towards (reducing the flow rate) the external neck
DOWNLOAD TECHNICAL SHEET >>
Related products
-
KF100
Synthetic flat filter celi for fan coils with U-section galvanised steel support frame and double electrowelded galvanised wire mesh that supports the FiltraSan™ sanitizing filter in AT100 series thermobonded staple fabric with a basis weight of 100 gr/m² and a thickness of 5-10 mm.
Read more -
SA10 Mastersan
Flexible hose made of addivated polyolefin resins film with anti-bacterial, antimildew and anti-viral material protection with steel wire helix.
Read more -
DCSQ
Circular diffuser with adjustable cones made up of concentric truncated cone profiles on a square panel, suitable for installation on false ceilings with 600x600mm panels. Height adjustable by means of an adjustment screw in order to change the direction of the air jet in relation to the required thermal conditions.
Read more -
DMU
Diffuser with individually adjustable micro nozzles with high output velocity and low sound in order to obtain extensive penetration depths of the room to be air conditioned.
Read more
VEA
Steel ventilation valve diffuser. The air flow rate is adjusted by screwing (reducing the flow rate) or unscrewing (increasing the flow rate) the central disc.
SPECIFICATION
• MATERIAL: steel
• COLOUR: RAL 9016 white.
• FASTENING: ceiling-mounted or fitted directly on the ventilation or return duct in service rooms
• INSTALLATION HEIGHT: 2.5 – 4 m
• USE: suitabl e for injecti ng or extractin g air i nto/from small rooms (bathrooms, kitchens); it can also be used as return terminai in medium-large rooms.
INSTALLATION
EASY INSTALLATION, adjustments and maintenance. The central disc is easy to remove by unscrewing the fastening nut and the central pin.
ADJUSTMENT
The air flow rate is adjusted by turning the disc away from (increasing the flow rate) or towards (reducing the flow rate) the external neck
DOWNLOAD TECHNICAL SHEET >>
Share
Related products
-
SA10 THERM Mastersan
Flexible hose made of addivated polyolefin resins film with anti-bacterial, antimildew and anti-viral material protection with steel wire helix. Thermoinsulating covering in polyester fibre (thickness 25mm/16kg/m3). Outer aluminized film protection (flame retardant).
Read more -
DSRQ – DSRSQ
Variable geometry diffuser on 597×597 mm panel developed for rooms with high ceilings where a long throw and a high induction ratio are required. Made up of a half-housing in which individually or simultaneously adjustable deflectors are fitted (if required) in order to change the direction of the air jet in relation to the thermal conditions required.
Read more
