Share
KAT200
Synthetic flat filter celi with U-section galvanised steel frame and double electrowelded galvanised wire mesh that supports the filter fabric in AT200 series thermobonded synthetic polyester staple fibre with a basis weight of 200 g/m² and a thickness of 20 mm.
TECHNICAL CHARACTERISTICS AND LIMITS OF USE
- EN ISO 16890:2016 Group ISO ePM10 50%
(ePM1 = 8% – ePM2,5 = 17% – ePM10 = 53%) - Efficiency class (CEN EN779-2012): G4
- Average gravimetrie efficiency : 90%
- Filter fabric basis weight: 200gr/m²
- Thickness: 20-22 mm
- Maximum operating temperature: 100°C
- Relative humidity: 100%
- Initial pressure drop: 43 Pa thickness 23 mm – 54 Pa thickness 48 mm
- Recommended final pressure drop: 250 Pa
- Maximum pressure drop: 400 Pa
- Dust collection capacity: 351 gr/m²
- Recommended frontal velocity: 1,5 m/s
- v classe F1
- NF-F-16-101: M1
GREEN BUILDING
Contribute to obtain the credits of the major international rating systems for sustainable buildings:
- LEED: IP, EA, MR
- WELL: AIR, MATERIALS, COMMUNITY
- BREEAM: MAN, WST
FILTERING MEDIA
The calibrated-density synthetic fibre with high operating efficiency is composed of AT200 series thermobonded polyester staple fibre with a basis weight of 200 gr/m2 and a thickness of 20 mm.
APPLICATIONS
Air treatment units, prefiltration in high-efficiency filters.
PRODUCT DISPOSAL
Dispose of the product by separati ng the metal part from the filtering part. The CER code for disposal of the metal part is 120101. The CER code for disposal of the filtering part is 150202.
DOWNLOAD TECHNICAL SHEET >>
Related products
-
SA10/ESP Mastersan
Flexible hose produced with exclusive technology by TECNICA SRL.
Read more -
DCMQ
High-induction circular diffuser with adjustable cones made up of concentric truncated cone profiles on a square panel, suitable for installation on false ceilings with 600×600 panels. Height adjustable by means of an adjustment screw in order to change the direction of the air jet in relation to the required thermal conditions.
Read more -
DMU
Diffuser with individually adjustable micro nozzles with high output velocity and low sound in order to obtain extensive penetration depths of the room to be air conditioned.
Read more -
DAM02C
Helical-effect diffuser with helically arranged adjustable deflectors with a high induction ratio (mixing capacity) between the injected and the ambient air. Made up of a plate with holes inside which adjustable plastic deflectors are housed.
Read more
KAT200
Synthetic flat filter celi with U-section galvanised steel frame and double electrowelded galvanised wire mesh that supports the filter fabric in AT200 series thermobonded synthetic polyester staple fibre with a basis weight of 200 g/m² and a thickness of 20 mm.
TECHNICAL CHARACTERISTICS AND LIMITS OF USE
- EN ISO 16890:2016 Group ISO ePM10 50%
(ePM1 = 8% – ePM2,5 = 17% – ePM10 = 53%) - Efficiency class (CEN EN779-2012): G4
- Average gravimetrie efficiency : 90%
- Filter fabric basis weight: 200gr/m²
- Thickness: 20-22 mm
- Maximum operating temperature: 100°C
- Relative humidity: 100%
- Initial pressure drop: 43 Pa thickness 23 mm – 54 Pa thickness 48 mm
- Recommended final pressure drop: 250 Pa
- Maximum pressure drop: 400 Pa
- Dust collection capacity: 351 gr/m²
- Recommended frontal velocity: 1,5 m/s
- v classe F1
- NF-F-16-101: M1
GREEN BUILDING
Contribute to obtain the credits of the major international rating systems for sustainable buildings:
- LEED: IP, EA, MR
- WELL: AIR, MATERIALS, COMMUNITY
- BREEAM: MAN, WST
FILTERING MEDIA
The calibrated-density synthetic fibre with high operating efficiency is composed of AT200 series thermobonded polyester staple fibre with a basis weight of 200 gr/m2 and a thickness of 20 mm.
APPLICATIONS
Air treatment units, prefiltration in high-efficiency filters.
PRODUCT DISPOSAL
Dispose of the product by separati ng the metal part from the filtering part. The CER code for disposal of the metal part is 120101. The CER code for disposal of the filtering part is 150202.
DOWNLOAD TECHNICAL SHEET >>
Share
Related products
-
KC35
Synthetic flat filter celi tor fan coils with U-section galvanised steel frame and double electrowelded galvanised wire mesh that supports the filter fabric in thermobonded synthetic polyester staple fibre impregnateci with AC CARBON series active carbons with a basis weight of 200 g/m² and a thickness of 5-10 mm.
Read more -
DSRQ – DSRSQ
Variable geometry diffuser on 597×597 mm panel developed for rooms with high ceilings where a long throw and a high induction ratio are required. Made up of a half-housing in which individually or simultaneously adjustable deflectors are fitted (if required) in order to change the direction of the air jet in relation to the thermal conditions required.
Read more
