Share
VMP
Polypropylene ventilation valve diffuser. The air flow rate is adjusted by screwing (reducing the flow rate) or unscrewing (increasing the flow rate) the central disc.
SPECIFICATIONS
• MATERIAL: polypropylene
• COLOUR: RAL 9016 white.
• FASTENING: ceiling-mounted or fitted directly on the ventilation or return duct in service rooms
• INSTALLATION HEIGHT: 2.5 – 4 m
• USE: suitable for injecting or extracting air into/from small rooms (bathrooms, kitchens); it can also be used as return terminal in medium-large rooms.
INSTALLATION
Adjustments and maintenance. The central disc is easy to remove by unscrewing the fastening nut and the central pin.
ADJUSTMENT
The air flow rate is adjusted by turning the disc away from (increasing the flow rate) or towards (reducing the flow rate) the external neck
DOWNLOAD TECHNICAL SHEET >>
Related products
-
KF100
Synthetic flat filter celi for fan coils with U-section galvanised steel support frame and double electrowelded galvanised wire mesh that supports the FiltraSan™ sanitizing filter in AT100 series thermobonded staple fabric with a basis weight of 100 gr/m² and a thickness of 5-10 mm.
Read more -
KF100/R
Synthetic flat filter cell far fan coils with U-section galvanised steel support and containment frame and double electrowelded galvanised wire mesh that supports the 10x 10 honeycomb filter fabric.
Read more -
KF125/R
Synthetic flat filter cell far fan coils with support and containment frame in 3mm-diameter drawn rod and double electrowelded galvanised steel wire mesh that supports the 10×10 honeycomb filter fabric.
Read more -
DAM31
Helical-effect diffuser with helically arranged adjustable deflectors with a high induction ratio (mixing capacity) between the injected and the ambient air. Made up of a plate with holes inside which adjustable plastic deflectors are housed.
Read more
VMP
Polypropylene ventilation valve diffuser. The air flow rate is adjusted by screwing (reducing the flow rate) or unscrewing (increasing the flow rate) the central disc.
SPECIFICATIONS
• MATERIAL: polypropylene
• COLOUR: RAL 9016 white.
• FASTENING: ceiling-mounted or fitted directly on the ventilation or return duct in service rooms
• INSTALLATION HEIGHT: 2.5 – 4 m
• USE: suitable for injecting or extracting air into/from small rooms (bathrooms, kitchens); it can also be used as return terminal in medium-large rooms.
INSTALLATION
Adjustments and maintenance. The central disc is easy to remove by unscrewing the fastening nut and the central pin.
ADJUSTMENT
The air flow rate is adjusted by turning the disc away from (increasing the flow rate) or towards (reducing the flow rate) the external neck
DOWNLOAD TECHNICAL SHEET >>
Share
Related products
-
DSR – DSRS
Variable geometry diffuser developped for rooms with high ceilings where a long throw and a high induction ratio are required. Made up of a housing in which individually or simultaneously adjustable deflectors are fitted (if required) in order to change the direction of the air jet in relation to the thermal conditions required.
Read more -
DLG
Nozzle diffuser for the treatment of large volumes of air. Nozzle orientable up to 45° in order to give the correct propagation direction on the air injected.
Read more