Share
VMP
Polypropylene ventilation valve diffuser. The air flow rate is adjusted by screwing (reducing the flow rate) or unscrewing (increasing the flow rate) the central disc.
SPECIFICATIONS
• MATERIAL: polypropylene
• COLOUR: RAL 9016 white.
• FASTENING: ceiling-mounted or fitted directly on the ventilation or return duct in service rooms
• INSTALLATION HEIGHT: 2.5 – 4 m
• USE: suitable for injecting or extracting air into/from small rooms (bathrooms, kitchens); it can also be used as return terminal in medium-large rooms.
INSTALLATION
Adjustments and maintenance. The central disc is easy to remove by unscrewing the fastening nut and the central pin.
ADJUSTMENT
The air flow rate is adjusted by turning the disc away from (increasing the flow rate) or towards (reducing the flow rate) the external neck
DOWNLOAD TECHNICAL SHEET
Related products
-
KF100
Synthetic flat filter celi for fan coils with U-section galvanised steel support frame and double electrowelded galvanised wire mesh that supports the FiltraSan™ sanitizing filter in AT100 series thermobonded staple fabric with a basis weight of 100 gr/m² and a thickness of 5-10 mm.
-
KF100/R
Synthetic flat filter cell far fan coils with U-section galvanised steel support and containment frame and double electrowelded galvanised wire mesh that supports the 10x 10 honeycomb filter fabric.
-
DCSQ
Circular diffuser with adjustable cones made up of concentric truncated cone profiles on a square panel, suitable for installation on false ceilings with 600x600mm panels. Height adjustable by means of an adjustment screw in order to change the direction of the air jet in relation to the required thermal conditions.
-
DSR – DSRS
Variable geometry diffuser developped for rooms with high ceilings where a long throw and a high induction ratio are required. Made up of a housing in which individually or simultaneously adjustable deflectors are fitted (if required) in order to change the direction of the air jet in relation to the thermal conditions required.
VMP
Polypropylene ventilation valve diffuser. The air flow rate is adjusted by screwing (reducing the flow rate) or unscrewing (increasing the flow rate) the central disc.
SPECIFICATIONS
• MATERIAL: polypropylene
• COLOUR: RAL 9016 white.
• FASTENING: ceiling-mounted or fitted directly on the ventilation or return duct in service rooms
• INSTALLATION HEIGHT: 2.5 – 4 m
• USE: suitable for injecting or extracting air into/from small rooms (bathrooms, kitchens); it can also be used as return terminal in medium-large rooms.
INSTALLATION
Adjustments and maintenance. The central disc is easy to remove by unscrewing the fastening nut and the central pin.
ADJUSTMENT
The air flow rate is adjusted by turning the disc away from (increasing the flow rate) or towards (reducing the flow rate) the external neck
DOWNLOAD TECHNICAL SHEET
Share
Related products
-
KF100
Synthetic flat filter celi for fan coils with U-section galvanised steel support frame and double electrowelded galvanised wire mesh that supports the FiltraSan™ sanitizing filter in AT100 series thermobonded staple fabric with a basis weight of 100 gr/m² and a thickness of 5-10 mm.
-
SA10/ESP SLEEVE Mastersan
Insulating sleeve produced with exclusive technology by TECNICA SRL.
